• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 79 subscribers
  • Views 415 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430FR6972: How does FR6972 achieve power failure detection?

人在江湖
Intellectual 705 points

Part Number: MSP430FR6972

Tool/software: Code Composer Studio

My customer is using FR6972 to realize voltage monitoring, to monitor the power failure, and to store the power failure when the power supply voltage is lower than a certain value. However, he found that the FR6 series is different from the previous F2 and 4 series SVS. Can the FR6972 achieve power failure detection now? How?

  • 0
    TI__Genius 13215 points

    Hi,

    Could you try the SVSHIFG.

  • 0
    TI__Genius 13215 points

    Hi,


    I haven’t heard from you for more than a week, so I’m assuming you were able to resolve your issue. If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information. If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum