• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 289 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430G2553: Highlight the text

Yash Shah
Intellectual 585 points
Part Number: MSP430G2553


Tool/software: Code Composer Studio

Hello,

I am Yash Shah and I have facing problem on text highlight on CCS.

I have compare two file each other and I have require to permanent highlight the specific text how to do this?  

  • 0
    TI__Mastermind 49692 points

    Yash Shah said:
    I have compare two file each other and I have require to permanent highlight the specific text how to do this?  

    I'm not sure I understand what you're asking. I took two files in CCS, made two minor changes (removed a line, changed 0x02 to 0x01) and then compared them. You can see the differences are highlighted in the screenshot below. If you're asking how to apply changes from one file to another, you can use the controls at the top right-hand side to move between and copy differences.

    Regards,

    James

**Attention** This is a public forum