CCS/MSP430F5529: ADC12 Time_A

duanjiali

Part Number: MSP430F5529
Other Parts Discussed in Thread: MSP430WARE

Tool/software: Code Composer Studio

I`m tried using the ADC to trigger the conversion with timer A0, but I have no ideal ,how should I set it up, is there code?

thanks.

over 6 years ago

0 Mitch Ridgeway over 6 years ago

TI__Expert 6635 points

Hi Duanjiali,

We have SW examples that would be helpful for you! Please open CCS and go to View > Resource Explorer. Then in Resource Explorer, go to Software > MSP430Ware > Devices > MSP430F5XX_6XX > MSP430F5529 > Peripheral Examples > Register Level. Here you will find ADC code examples along with timer examples.

Please let me know if you have any other questions!

-Mitch

0 duanjiali over 6 years ago in reply to Mitch Ridgeway

Prodigy 100 points

But I didn`t find a code examples with start conversion with timer. I`m really confused.

0 Bruce McKenney over 6 years ago in reply to duanjiali

Guru 100785 points

0 Mitch Ridgeway over 6 years ago in reply to Bruce McKenney

TI__Expert 6635 points

Hi Duanjiali,

Did Bruce's suggestion help? (thanks Bruce!)

Please let me know if you have questions.

Thanks,

Mitch

0 duanjiali over 6 years ago in reply to Mitch Ridgeway

Prodigy 100 points

Can I stop the ADC12 when it work with Repeat-Sequence-of-Channels Mode (Repeated Autoscan Mode)

0 Bruce McKenney over 6 years ago in reply to duanjiali

Guru 100785 points

The procedures for stopping the ADC are in User Guide (SLAU208Q) section 28.2.7.6.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F5529: ADC12 Time_A