Hello All,
The following is based on what I've obtained from this PDF:www.ti.com/.../slaa503.pdf
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello All,
The following is based on what I've obtained from this PDF:www.ti.com/.../slaa503.pdf
Hi user4708725,
The closest schematic is the block diagram (Figure 2) of the application report.
The driver block used was a 6x PWM gate driver.
There are several devices that can be used for the driver. Examples of 6x PWM devices include the DRV8301, DRV8302, DRV8303, DRV8304, DRV8305, DRV8320, and DRV8350.
A complete list of devices can be found here:
With some code modifications, the DRV8312, DRV8332, and DRV8313 could also be used.
Is there any supporting hardware that can be used directly without modifying the program?
If I use DRV8303EVM, How to modify the Closed Loop Control?
Hello,
The DRV8303 accepts 6x input so you should be able to use it directly. The changes for the code will need to be for the housekeeping stuff like fault, enable, etc.
Regards,
-Adam
Hello,
If your issue has been resolved, please help us out by clicking the green “This Resolved My Issue” button.
If you have a related question, please use the orange "Ask a related question" in the top right corner of the page.
Regards,
-Adam
**Attention** This is a public forum