Other Parts Discussed in Thread: MSP-EXP430G2ET
Tool/software: Code Composer Studio
Hello sir.,
I am using MSP-EXP430G2ET Launchpad ,i require driver setup file for external controller debugging. i installed FET Pro 430 ,but it shows JTAG Initialization issues and security fuse failed Error. PlZ Help.
Regards,
intelux elec.pune.
Hello,
In FET-Pro430, check your JTAG settings under Setup > Connection / Device Reset. The "Communication with Target Device" should be set to "Spy Bi Wire (2 wires)". I purposely changed my settings to "JTAG (4 wires)" as a test, and I suspect that I got the error you're seeing.
Regards,
James
**Attention** This is a public forum
