• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 78 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP432P4011: MSP-FET load firmware using SWD interface

Huck Lim1
Prodigy 70 points

Part Number: MSP432P4011

Hello everyone,

I am new to TI products and am have difficulty navigating through all the possible MSP debuggers/programmers. Can you please help me on this?

I would like to program/load my firmware onto the MSP432P4011 microcontroller. I am looking into the MSP-FET programmer using the SWD interface. Before I buy the MSP-FET Programmer, I would like a confirmation from the TI experts that I am getting the right MSP-FET Programmer to load my firmware to the microcontroller using the SWD interface.

What make me post this question is, in the documentation (MSP Debugger User Guide SLAU647M-July 2015 Revised February 2019), although SWD is mentioned, I am not able to see the SWDIO, SWCLK pins listed in the document. For example, in section 5.6.6.3, Table 9, JTAG and SWD Interface Specification, I do not find the SWDIO or SWCLK pins listed.

Also what is 'SimpleLink'?

Thanks in advance for your answer.

yours sincerely,

Huck Lim

**Attention** This is a public forum