CCS/MSP430F5529: Use SPI A and B

harshana rathnayake

Intellectual 355 points

Part Number: MSP430F5529

Tool/software: Code Composer Studio

I want to use SPI A and SPI B both in MSP430F5529 in one circuit. is it possible?

over 5 years ago

0 Peter Spevak over 5 years ago

TI__Genius 17960 points

Hello Harshana,

the MSP430F5529 supports 4 independent SPI channels. This means 2 SPIA and 2 SPIB channels. So of course it is possible to use also one SPIA and one SPIB channel simultaneously.

Best regards

Peter

0 Peter Spevak over 5 years ago in reply to Peter Spevak

TI__Genius 17960 points

Hello Harshana,

under the assumption your question has been answered sufficiently I am closing this thread.

Best regards

Peter

0 harshana rathnayake over 5 years ago in reply to Peter Spevak

Intellectual 355 points

Sorry for the delay,

If I use 2 SPI interfaces, then which pins I can use?

Best regards,

0 Peter Spevak over 5 years ago in reply to harshana rathnayake

TI__Genius 17960 points

Hello Harshana,

this basic information you can find in the device datasheet in Figure 4-1, or Table4-1. Terminal Functions

Best regards

Peter

0 Peter Spevak over 5 years ago in reply to Peter Spevak

TI__Genius 17960 points

Hello Harshana,

under the assumption your questions have been answered sufficiently I am closing this thread.

Best regards

Peter

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F5529: Use SPI A and B