• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430F5510: C code for I2C writting

Luis Fernando Rodriguez S.
Guru* 84915 points

Part Number: MSP430F5510
Other Parts Discussed in Thread: TLV320DAC3203

Tool/software: Code Composer Studio

Hi, Team,

Thank you for your attention.

We are looking for some help to develop a C code that configures the I2C interface of the MSP430F5510. We would like to configure some registers of our TLV320DAC3203 with this MSP430 device through the I2C lines, but we need of your experience to create a code that we can use just to send the I2C commands.

Could you help us to develop this code, please? Basically, we just need of an I2C writing function that we could use to send our register settings (we already have the registers values, but we don't have much experience using the MSP430F5510 and CCS.

Any information you could provide will be appreciated.

Best regards,
Luis Fernando Rodríguez S.
LPAA.

**Attention** This is a public forum