You lot sound like a knowledgable group around getting this up and running natively on a Mac. I thought I had this going pre-Christmas but since then I've updated to 10.6.6 and reverted back to 32bit, and now can't get anything with my ez430U dongle going. I've looked around on a few forums, but haven't seen any answers or insights as to why this error occurs.
>mspdebug rf2500
Trying to open interface 1 on 003
rf2500: can't claim interface: Result too large
rf2500: failed to open RF2500 device
Any hints would be great.
Thanks,
Phil
PS.. mspdebug --usb-list gives
.
.
Devices on bus 026:
026:001 05ac:8005
026:002 05ac:8206
026:003 0451:f432 eZ430-RF2500
.
.