• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 399 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

RTS/CTS flow control via GPIO example code?

MSP432P401R: MSP432 RTS/CTS flow control via GPIO example code? AGAIN....

Robert Cachro
Intellectual 845 points

Part Number: MSP432P401R

Has anyone had any luck implementing a GPIO RTS/CTS flow control for MSP432?

 response here was very informative, but we lack the technical expertise to follow through...

Thank you folks.

Best,

Robert

  • 0
    TI__Guru 68011 points

    Hi Robert,

    Besides the thread you mention, I'm not coming up with anything.  Perhaps someone in the community can advise.

  • 0 in reply to Dennis Lehman
    TI__Guru 68011 points

    Hello Robert,

    I'll assume you were able to resolve your issue so I will go ahead and close this thread.
    If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.


**Attention** This is a public forum