• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 468 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430G2001: Programmer for MSP430G2001

Adam Daluga
Expert 6605 points

Part Number: MSP430G2001
Other Parts Discussed in Thread: MSP-FET, MSP-EXP430G2ET

Hi,

I am making a wearable social distancing sensor with an ultrasonic distance sensor using the MSP430G2001.

I need a programmer for it now, any recommendations?

Thanks,
Adam

  • 0
    TI__Mastermind 47205 points

    Hi Adam,

    You could use the MSP-FET for full JTAG or a launchpad to program using Spy bi Wire. 

    If you already have an MSP430 launchpad(any of them should work), you can remove the jumpers from the isolation block to disconnect the target MCU and program an external device using the TST and RST pins which should be jumped to your MSP430G2001 board.  In MSP-EXP430G2ET, the isolation block is J3, but all of the launchpads have this header.

**Attention** This is a public forum