• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 308 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Launch pad not recognized by the PC!

Hasith Ishara Kulathilaka
Intellectual 355 points

Other Parts Discussed in Thread: MSP430G2452

Hey,

I am using Windows 7. When I connect my launch pad with a MSP430G2452 on it ,CCS says

"MSP430: Trouble Writing Memory Block at 0xfff4 on Page 0 of Length 0x2: Could not write device memory".

COM11 is working perfectly.I think the settings of the port is wrong.Pls tell me the port settings of the PC .

Thank u.

**Attention** This is a public forum