MSP430FR5994: ERROR: gmake not found in path . CCS

lu pohsun

Part Number: MSP430FR5994

CCS often encounters this problem when compiling.

Although CCS is turned on again, it becomes normal.

But it didn't take long to reappear.

Is there any way to completely solve this error ?

Configuration : 
Ubuntu 16.04
CCS 10.2.0

0 Ki over 4 years ago

Hello,

Is the gmake utility actually present in /home/lu/ti/ccs1020/ccs/utils/bin?

Thanks

0 lu pohsun over 4 years ago

Yes,As shown in the picture, there is gmake there.

Thanks.

0 Ki over 4 years ago in reply to lu pohsun

Unfortunately the image you posted is blocked by my company IT. Can you simply add it to this thread?

Assuming that gmake is indeed there, please also see the below link in the troubleshooting giude:

Note the section about checking the system path to see if there are other gmake utilities that could be called.

Thanks

0 Ki over 4 years ago in reply to Ki

I was able to access the image so no need to repost. Can you confirm that you have execute permissions for that gmake utility?

**Attention** This is a public forum

MSP low-power microcontroller forum