• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 312 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430G2553: Hi. I have MSP430 launchpad and MSP430G2553 microcontroller. I wrote code in CCS and IAR Embedded workbench and connected my launcpad to pc but gave an error which "One of the connected MSP-FETs / eZ-FETs debuggers needs recovery" h

Furkan Gören
Prodigy 10 points
Part Number: MSP430G2553


  • 0
    TI__Guru 71216 points

    Hi Furkan,

    Did you click the "Recover" button?

  • 0 in reply to Dennis Lehman
    TI__Guru 71216 points

    Hello Furkan,

    Since it looks like you were able to resolve your issue, I'll change the status of this posting to RESOLVED.
    If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum