Hello,
I tried to download a driver for “MSP430 USB-Debug-Interface MSP-FET 430UIF” from here: www.ti.com/.../MSPDS, but I was unable to do so. Then, I asked Texas Instruments Customer Support for help, still I haven't found the driver. I have downloaded UNIFLASH to download the driver, but my PC hasn't yet recognised the device.
Any suggestion would be appreciated.
Thank you in advance,
Hi Dennis,
Thank you for the advice. I tried to launch a new project in CCS Cloud and checked every device name available in the list, but I couldn't find "MSP-FET430" in it. Do I have to launch a project with a random device name though?
I cannot just choose "MSP430" because I don't see it in the list. As you see in the photo, I'm using "MSP-FET430UIF". 
Finally I found the microcontroller and pressed the button "Run", but it failed: 
I unplugged and re-plugged the USB connection, it still didn't work.
Hi Kangsong,
Great!
Now, if you create a new project in CCS cloud, you should see the MSP430F2112 in the list. Select it, then provide a name for your project.
Make sure you have your MSP-FET connected to your PC.
Click the green "bug"
Do you see this message? If not, what message do you see?
Hello Dennis,
I have followed your procedure and saw the following popup messages:
Other than these, it seems nothing happend. I have not still had the driver.
I am unsure if this would be useful for you, but here is the message I got as for the installation:
It seems I have misunderstood something... When I saw the device's property through Device manager and tried to update the driver, it turned out that the driver was already installed. Sorry for having disturbed you for such a long time and thank you for your great support!
**Attention** This is a public forum
