• [FAQ] Trapezoidal Control of BLDC Motors Using Hall Effect Sensors on C2000 Controller

    Other Parts Discussed in Thread: TMS320F28069 , TMS320F28035 , TMS320F28027 , CONTROLSUITE , DRV8312 What are the resources to implement Trapezoidal Control of BLDC Motors with Hall Effect Sensors using C2000 MCUs? Best, Matthew

  • [FAQ] Compiler/TI-RTOS-MCU: How can I control the placement of the "c_int00" program entry point with the TI Compiler?

    Part Number: TI-RTOS-MCU Tool/software: TI C/C++ Compiler How can I control the placement of the "c_int00" program entry point with the TI Compiler for CortexM and C6x devices?

  • [FAQ] MSPCAPTDSNCTR: User interface text and graphic size too small on Windows PC's with 4K displays

    Part Number: MSPCAPTDSNCTR If you have a Microsoft Windows 10 PC with a 4K display and are working with TI's CapTIvate Design Center , Ultrasonic Sensing Design Center , or Energy Measurement Design Center software tools, than this post applies to you…

  • [FAQ]Getting Started with C2000 MCUs for Motor Control

    Other Parts Discussed in Thread: CONTROLSUITE , MOTORWARE What are the resources for getting started with motor control using C2000 MCUs, both hardware and software?

  • [FAQ] How to use Flash Mirror Mode

    Part Number: MSP432E401Y Other Parts Discussed in Thread: MMWAVEPOEEVM Tool/software: TI C/C++ Compiler We are working on a field firmware upgrade solution for our MSP432E project in which a new firmware image will be received via FTP and stored in…

  • [FAQ] How do I change the system stack size or place sections for a TI-RTOS application in IAR project?

    I have an IAR project using TI-RTOS (also called SYS/BIOS). How do I configure the size of the kernel's system stack? The kernel configuration file has the stack size set to zero. I'd also like to specify the locations of certain sections in memory. How…

  • [FAQ] Can I update the vector table with IntRegister when using TI-RTOS?

    I'm moving an application over from a non-RTOS platform to TI-RTOS. My application is crashing or getting "E_unpluggedInterrupt: Unplugged interrupt flagged: intr# 19". I have the following code that plugs the vector table in the TI-RTOS application.…

  • [FAQ] How to Trick the CCS debugger into providing a blocked TI-RTOS (SYS/BIOS) task call stack on Cortex-M devices

    Other Parts Discussed in Thread: SYSBIOS Beginning with SYS/BIOS release 6.35.02.45 , the Task module provides a non-invasive per task CallStack ROV view. The instructions below are for SYS/BIOS versions before 6.35.02.45 ( that do not support these…

  • [FAQ] TI-RTOS: How should an application create kernel objects?

    Other Parts Discussed in Thread: TI-RTOS-MCU I want to create an application using the TI-RTOS kernel (SYS/BIOS). What options do I have to create kernel objects?

  • [FAQ] TMS320F28035: Q. What are some design considerations when an application desires the use of WDFLAG bit to distinguish between a watchdog (WD) initiated reset and other forms of reset?

    Part Number: TMS320F28035 A. Many C2000 devices have internal circuitry to detect if a watchdog reset (WDRST) or a Power-on-Reset (POR)/External reset (by way of activating the -XRS pin) has occurred. This article describes how this circuitry works…

View FAQ threads