• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 4317 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] Proper RC Snubber Design for Motor Drivers

Designing an RC snubber for the MOSFET of Buck converter

Mohammad Asif
Prodigy 70 points

Hi Team,

I have designed an RC snubber for MOSFET switch of Buck converter. It does not remove the ringing noise present at the output of buck converter.

At the first place i want to know, can i use this method(https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/991693/faq-proper-rc-snubber-design-for-motor-drivers) for RC snubber design to mitigate the noise available at the buck converter output?

If not please let me know, what are the possible options to remove the ringing noise available at the buck converter output.

Thanks.