• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 29 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8702-Q1EVM: DRV8702-Q1EVM

Mangesh Dhakane
Prodigy 20 points
Part Number: DRV8702-Q1EVM

Newly purchased  DRV8702-Q1EVM output is always 0v irrspective of PWM set via TI application.

Please provide the detailed steps/instructions to operate the eval kit.

user manual does not have proper information.

  • 0
    TI__Mastermind 37683 points

    Hi Mangesh,

    I will be helping you get the EVM working. I want to start by figuring out what the problem is. On the bottom left side of the GUI application, does it read "Connected" with green circle? Similar to the image below

    Regards,

    Pablo Armet

  • 0 in reply to Pablo Armet
    Prodigy 20 points

    Hi Pablo,

    Yes the connection with COM port was successful.

    I went through the user manual again and found the sequence. I connected the load then USB and then PVDD and now communication is happening. Issue is resolved for now.

    Thank you!

    Regards,

    Mangesh