MCF8316AEVM: File Loader: Verification failed

Hi Muhammed,

Likely this error is caused by the settings of the project not erasing or unlocking the user code section of memory on the MSP430FR2355 on the EVM. Can you try following the solution this thread: https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1213407/msp430fr2355-verification-failed-values-at-address-0x08000-do-not-match-please-verify-target-memory-and-memory-map

Solution copied here for convenience: 

Right click on your project-> select properties->select msp43x options-> in connection options select [on connect erase user code and unlock the device].
Tick this box and run the code.

Regards,

Joshua