This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear TI Team
I am looking for a suitable motor driver to drive the following gimbal motors.
https://www.flashhobby.com/index.php?id=3519
For example, I think DRV10866 is good.
If you know of any other good device, please let me know.
Best Regards,
Y.Ottey
Hi Ottey,
Thanks for posting your question in MD forum. Looking at the motor datasheet, I think DRV10974 will be a suitable device for your application. Below are some useful links:
DRV10974EVM
Regards,
Vishnu.
Hi Vishnu,
Thank you for your reply.
You checked the data sheet and selected the DRV10794, but when I looked at the product page, the specifications were as follows.
(The operating voltage range and rated current of the motor were unknown.)
Could you please tell us what specifications you have specified in the data sheet based on which you selected the DRV10794?
Regards,
Y.Ottey
In the torque section, I see 5V and 0.44 A. DRV10974 can support this voltage and current spec.
Regards,
Vishnu.