This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Hi-Lo System is going to program IC as below for customer, and we need your help to provide us some documents listed below. We’re looking forward to your reply. Thank you.
IC P/N: TPS53685RSBR
Package: WQFN 40
Customer: Pegatron
Request: Programming specification, program/read suggestive circuit schematic
Hi,
Thanks for posting on E2E forum.
Following are required to program TPS53685:
1. Fusion GUI
2. USB to GPIO adpater
You can download the Fusion GUI from https://www.ti.com/tool/FUSION_DIGITAL_POWER_DESIGNER.
USB to GPIO adapter canbe ordered from https://www.ti.com/tool/USB-TO-GPIO?keyMatch=USB%20TO%20GPIO#description.
The app note https://www.ti.com/lit/pdf/sluubl0 explains how to use the Fusion GUI to program devices.
I'm assuming you have the TPS53685 soldered down on the board. If not, you need programming board to program the device. Programming board has socket where the IC can be placed and programmed.
Hi Murali,
Hi-Lo Systems is a company providing off-line programming service on a universal programmer, and we need your help to provide the programming specification such as pin definition for programming, programming flow and program/read suggestive circuit schematic, so that we can design a socket board to program IC on our own off-line programmer.
Thnank you.
Hi,
I would like to move the request from E2E to offline. Could you forward your request to vr@list.ti.com?
I'm closing the request on E2E as we will be communicating by emails.