• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 246 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62410: Vout range

Nam, Dino
Expert 6345 points
Part Number: TPS62410

Dear team, 

At datasheet of TPS62410, If the customer use EasyScaleTm One-Pin Serial Interface for Dynamic Output Voltage Adjustment, Vout1 output is up to 1.575, Vout2 output is up to 3.3V. is it right? 

Is there other solution having up to 5V output range? Needed voltage step is 0.1V.  I2C , serial interface or PWM control would be OK. 

Please let me know your opinion regarding having up to 5V output range for Dynamic Output Voltage Adjustment.

Thank you. 

  • 0
    TI__Mastermind 23500 points

    Hi,

    At datasheet of TPS62410, If the customer use EasyScaleTM One-Pin Serial Interface for Dynamic Output Voltage Adjustment, Vout1 output is up to 1.575, Vout2 output is up to 3.3V. is it right? - Correct

    Are you looking for a dual converter with I2C? If so, that could be challenging within BSR-LV. Unfortunately, we do not have a solution within BSR-LV satisfying all your requirements.

    However, let me share a couple of our latest devices with you. Please have a look at them and let me know your feedback.

    TPS6244x - Dual-Channel Step-Down Converter 

    TPS62868x - 4A/6A Step-Down Converter with I2C Interface in QFN Package 

    TPS62864/6 - 4A/6A  Step-Down Converter with I2C Interface in WCSP Package

    Regards,

    Febin

  • 0 in reply to Febin
    TI__Expert 6345 points

    Hi Febin, 

    Thank you for your reply. 

    My customer need only 1ch device for Dynamic Output Voltage Adjustment. 

    It doesn't matter what kind of interface.

    Thank you. 

  • 0 in reply to Nam, Dino
    TI__Mastermind 23500 points

    Hi,

    Sorry, BSR-LV do not have a device that can support 5V output with dynamic voltage setting.

    You can check with BSR-MV, probably they have a solution for you.

    Regards,

    Febin