UCD90160: [Consultation] Sequencer: UCD90160RGCR

Paul Lei

Part Number: UCD90160

Dear TI service team,

This is Paul from ZT systems hardware team.

For firmware update related, I have one more question for this sequencer: UCD90160RGCR.

Could you help provide specification of firmware update to me ?

Thank you very much.

Best Regards,

Paul Lei

0 yihe over 3 years ago

I want to understand what the firmware is referred here?

From TI side, the firmware is the code running inside the chip and loaded by TI during the manufacturing and customers shall not touch it.

is this what you mean or the firmware in your original post refers to the configuration generated from fusion GUI.

Regards

Yihe

0 Paul Lei over 3 years ago in reply to yihe

Dear Yihe,

I mean that the functions can be tuned by user (e.g. power sequence tuning), and it's as same as the latter description that you mention.

We need to know the stipulation/specification of operation procedure, and it could let us modified to desired configuration before fusion in NVM.

If it is okay for you, please help provide this portion to me once you get the materials.

Thank you very much.

Best Regards,

Paul Lei

+1 yihe over 3 years ago in reply to Paul Lei

Please refer section 9.5 and 9.6 of the document

Regards

Yihe

0 Paul Lei over 3 years ago in reply to yihe

Dear Yihe,

Really appreciate your prompt feedback and great support.

Best Regards,

Paul Lei

Power management forum