This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Good day,
Can you please advise, the datasheet shows that the VBias voltage can be up to 5V5 ? (Table 6.3)
However in table 6.5 it is stated to be Max 5.25V
The intent is to supply with 5v5 and have a output of 3V3. Thus connecting VBias and Vin to 5V5
Kind regards
Gerhard Ebersohn
Hi Gerhard,
This looks to be an error in the datasheet. The device can support voltage up to 5.5V on VBIAS as in the ROC table. operating VBIAS at 5.5V would be a perfectly acceptable configuration for this device.
Regards,
John