BQ25616: BQ25616

Leonardo Marquez

Part Number: BQ25616

Hello all,

I am using BQ25616 but I only need the battery charging functionality, not the boost regulator.

Do I need the inductor, Cout and a load? Can I leave the Boost related pins unconnected?

Thanks

0 Ning T over 2 years ago

Hi,

If OTG boost mode is not used, short it to ground.

The output inductor and output capacitor are must-have. No SYS load is ok.

Thanks,

Ning.

0 Leonardo Marquez over 2 years ago in reply to Ning T

Yes. I realized later that inductor and capacitor are required to charge the battery. Thanks for confirming that no SYS load is OK.

Power management forum