LM1086: Package drawing update

Hello Juliette,

Yes, plz refer to this web: LM1086: Is there any spec change for LM1086CSX-ADJ/NOPB? - Power management forum - Power management - TI E2E support forums.

I was told that the correct package drawing will be updated, but I still do not see any update yet. Please kindly help check.

Thank you,

Bri

Hey Bri,

I will confirm with Nick to see if action was taken on this. Otherwise, I will confirm which package drawing should be referenced. 

Typically, updating data sheets takes time but TI's website includes package drawings that we will be able to link you to in the meantime.

Best,

Juliette

Dear Juliette,

May we have any update on when the new package drawing will be released out?

Also, for this package drawings, could you share the link to us as well?

Juliette said:

package drawings that we will be able to link you to in the meantime.

Thank you & Best,

Bri

Hey Bridget, 

Nick has not gotten back to me yet, but I will re-ping him. 

Best,

Juliette

Hello Juliette,

Did Nick get back to you yet? When will we see the update?

Good day & Best,

Bri

Hello Juliette,

Thank you for checking. Please kindly let me know any update.

Also, I clicked "This resolved my issue" by mistake. Could you kindly help change the status back to avoid any confusion?

Hello Bridget, 

I think the thread should be open again now. 

Best,

Juliette

Hi Juliette,

Can you help to provide the latest Datasheet which has dimensional Change 

Hello Mohan, 

Juliette is OoO. 

Let me see what I can do on my end. My understanding is that the devices received have a shorter length compared to the one shown on DS, correct? 

May I understand how this will impact the use for the device?

Also, has more than one device been measured? Has any other dimension been measured? Lastly, was the measured device handled with care to not contract the leads?

All the possible information provided will help make any appropriate changes and keep on pushing from our end as well. 

Best, 

Edgar Acosta

Hi 

Yes , the devices received have a shorter length compared to the one shown on DS,  It was already accepted by Juliette &  Bridget Conversation 

2 Samples has been measured , kindly check your current lot for clarification and help to provide Latest datasheet , it may get delay  else  support to provide 

TI Proof letter ( Temperary )  to clear the current Lot 

Hello Edgar & Juliette,

This is real emergency. We have faced line down situation for a while.
It was already accepted "incorrect package drawing was referenced for this device and will be updated". But 4 months has passed, we still could not find updated file. Please kindly help share updated datasheet or any related documentation so we could use the parts.

Hi Bridget, 

I apologize for the delayed response, Monday was a Holiday in the US. 

I'm currently working with the team to get a status on this since I was looped in later. 

This is an update that corresponds to our Packaging team, as we do not have direct access to modify the package drawings. The LDO team has been pushing to get the drawings updated, however, getting data sheets updated takes some time + the communication between groups involved, as this is a package drawing used not only by our team but TI wide. This will impact any other device that uses this package. 

In addition, where any other dimensions measured? This will also help to see if anything else needs to be updated or not. 

Best, 

Edgar Acosta