LM2593HV: LM2593HV

Lars Jespersen

Part Number: LM2593HV

Hi,

Back in august 2020 I was told that the typo in the datasheet would come on a list of changes... Still not corrected...?

BR,

Lars

over 1 year ago

0 Richard Fu22 over 1 year ago

TI__Mastermind 23310 points

Hi Lars,

I've noted this one down. This document is quite old so updating can take some time to make sure it meets recent standards.

Regards,

Richard

0 Lars Jespersen over 1 year ago in reply to Richard Fu22

Prodigy 70 points

Hi Richard,

Thanks. What would the time-line for this be?

And I assume that you're still of the opinion that the protection diode is necessary for high Vout and not high Vin?

BR,

Lars

0 Richard Fu22 over 1 year ago in reply to Lars Jespersen

TI__Mastermind 23310 points

Hi Lars,

I'm not really sure of the timeline but I know that the datasheet was last updated 7 years ago so the changes it will need to undergo is probably extensive. I anticipate minimum 2-3 weeks from modification to update.

And yes, the protection diode is necessary for high Vout and not high Vin.

Regards,

Richard

0 Lars Jespersen over 1 year ago in reply to Richard Fu22

Prodigy 70 points

Hi Richard,

Thanks. 2-3 weeks doesn't seem like very long time, considering that this was discussed more than 2 years ago...

/Lars

0 Richard Fu22 over 1 year ago in reply to Lars Jespersen

TI__Mastermind 23310 points

Hi Lars,

I'll take a look into this one, and for now i'll assign the engineer in charge of E2E for this month. The engineer is OOO until next week so please anticipate delay in response.

Regards,

Richard

0 Lars Jespersen over 1 year ago

Prodigy 70 points

Hi Richard Fu22,

any progress?

/Lars

0 Richard Fu22 over 1 year ago in reply to Lars Jespersen

TI__Mastermind 23310 points

Hi Lars,

I'm working on updating the datasheet with the documentation team. I'll let you know when the work is finished.

Regards,

Richard

0 Lars Jespersen over 1 year ago in reply to Richard Fu22

Prodigy 70 points

Hi Richard,

Thanks!

/Lars

0 Youhao Xi over 1 year ago in reply to Lars Jespersen

TI__Guru 74310 points

Hi Lars,

Thank you for being patient. Please wait for a week or so if Richard does not update and you want to post a follow up post. Each time you post something even just a simple "thanks", we will have to respond in 24 hours. Please wait a week or so, and thank you for your cooperation.

Best Regards,

Youhao

Power management

Power management forum

LM2593HV: LM2593HV