This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Gas guage ic Bq2010, count is not increase as rate >2/sec

Other Parts Discussed in Thread: BQ2010

Dear all,

                  Can anybody give ans . of my question. i am doing battery charging circuit. i am using ic bq2010 for gas guaging. i developed all circuit for battery charing circuit.

the battery charging circuit works ok. the time for full charge  of battery is arround 8.30 hrs. during this time periode the count of gas guaging ic goes arround 90% of its full capacity.

                    i check all circuit. it is ok as per application cirucit.

                    the battery is going to trickle charge continously. in fast charge the count must be arrount 10 cnts for 5 second. but i getting count is 7-8 for 5 second.

                    please guide me.

 

thanks & regards

Anand kalode.

anand.kalode@electronicaems.com.