FAQs
- How to enter UNSEAL or FULL ACCESS modes after sealing the gauge?
- How long does the voltage on the PACK pin need to be applied to wake-up the gauge?
- What are the differences between hardware and firmware protections?
- How Many FETs Can Gauges With Integrated Protection Drive?
- What is the TI BMS Flashstream file format?
- How do I configure the gauge to drive fewer than 5 LEDs?
- What is the procedure to program the SHA-1 secure key?
Application Notes
- Simple Guide to Chemical ID Selection Tool (GPC)
- Gauge Communication
- TI Fuel Gauge Authentication Key Packager and Programmer Tools
- Advanced Charge Algorithm
- Autonomous Smart Battery Guide
- BQ40Z50 Data Memory Programming for Mass Production
- BQ40Zxx Manufacture, Production, and Calibration
- SMBus Made Simple
- A Simple Battery Simulator
- Collecting IVT data for testing
- Simple Guide to CEDV Data Collection for Gauging Parameter Calculator
Older application notes with applicable information:
