• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 64 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90124A: ucd90124A configure problem

erez nahoum
Prodigy 70 points
Part Number: UCD90124A

Hi,

I'm trying to configure UCD90124A from CSV and get:

(please see picture below)

Any clue what could be the problem?

Thanks,

Erez

  • 0
    TI__Expert 8630 points

    Hi, Erez,

    Look like it takes longer than 1500 ms for device to startup, that's why device NACK on. Try modifying your script to pause longer.

    Regards

    Anne Ngo

    Texas Instruments

  • 0 in reply to Anne Ngo77
    Prodigy 70 points

    Hi,

    Thanks for you prompt reply.

    I  have used the same script to configure 10 component and it's was fine.

    Is the startup time related to external components?

    B.T.W: The script was created automatically by Fusion.

    Best regards,

    Erez

  • 0 in reply to erez nahoum
    TI__Expert 8630 points

    Hi, Erez,

    Startup time might be varied due to system such s communication time, faults logging.

    Regards

    Anne Ngo

    Texas Instruments