This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSI3050-Q1: Add resistance between EN-GND?

Part Number: TPSI3050-Q1


The 1Kohm resistance was added between EN-GND for troubleshooting during the test.

And there was no problem when the ON/OFF test was conducted.

Is there anything that could be a problem by adding resistance?

If so, what additional tests should I try


  • Hello David,

    One problem might be the constant leakage current. Depending on the voltage at EN in 2-wire mode, with 1-kΩ pulldown at EN the leakage current can be anywhere from 6.5-mA to 48-mA. Increasing the external EN pulldown resistor to 100-kΩ can reduce the leakage current to 65-uA to 0.48-mA.

    Best regards,
    Tilden Chen

    Solid State Relays | Applications Engineer