This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
We are using the BQ25798 BMS IC with the BQ25790 driver code, and we are attempting to read the voltage and current from the BMS. Below is the data we collected:
During charging:
During discharging:
Why are we getting IBAT = 0mA during discharging?
Hi Sartahk,
The IBAT bit (REG0x14b5) must be enabled and running average (REG0x2Eb3) must be disabled in order for the ADC to measure discharge current.
Regards,
Jared Baxter