Tool/software:
Hi team,
The load regulation in the datasheet is only 1.5A on the horizontal axis, and the waveform is very similar to that of TPS742/748.
Please tell me the correct load regulation of NewChip.

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi team,
The load regulation in the datasheet is only 1.5A on the horizontal axis, and the waveform is very similar to that of TPS742/748.
Please tell me the correct load regulation of NewChip.

Hello,
Thank you for your question.
We are sorry that the load regulation only includes the load regulation data up to 1.5A.
Please find the load regulation data up to 3A below:

Hope this helps!
Best,
Hannah
Hi Hannah,
Thank you, that's helpful.
What percentage of specs will the new chip have?
I've heard it will be better, but I haven't received an answer.
50mA < Iout < 3A (new chip) 0.09%/mA
I think the denominator of the unit is a typo.
Is the load regulation three times worse with the new chip?
Yes, this seems like an error. The load regulation is better. Sorry for the misunderstanding.
I am waiting for the data sheet to be corrected, but could you please tell me the load regulation values for the new chip?
Hey,
I apologize for the delay on this matter, I am looking into getting the info you requested. I will have it back to you as soon as possible.
Thanks,
Vahnroy Hosear
Hey,
Thank you for your patience, I have attached the load regulation values below:

Thank you.
I understand that the load regulation of the new chip is worse than that of the legacy chip.