This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I'm considering a TLV62150 device.
I have a question about the maximum rating of the SW pin.
In my measurement, the voltage of the SW pin drops to -0.7V. The maximum rating of the data sheet is -0.3V.
However, when looking at the data sheet (Rev. G) of TLV62130 of the similar device, -2V is added as the condition of SW (AC).
Is there a possibility that the condition of SW (AC) will be added to the maximum rating of the data sheet even at TLV62150?
Best Regards,