TPS62240: Simulation Question

Richard Elmquist

Part Number: TPS62240

I have a customer who is trying to simulate the output impedance of the TPS62240. I have attached his comments and the results of the simulation.

TPS62240 Simulation Question.docx

Can you look at this and verify that the model is producing the proper results? I believe that it is, but I really would like you to verify that the model can simulate the results that the customer is seeing.

Please let me know if you have any further questions for the customer.

Thanks for your help with this!

Richard Elmquist

over 7 years ago

0 Abhishek Tripathy over 7 years ago

TI__Intellectual 835 points

Hi Richard,

The schematic attached by customer is not very clear. We are unable to read few values from it. Could you please request for the PSpice project from them? Kindly ask for the version of PSpice used by them.
Also, we think that the images of the two schematics attached in the .docx file are interchanged. The schematic mentioned as modified schematic is actually the released PSpice schematic. Kindly confirm this as well.

Thanks & Regards,
Abhisek

0 Richard Elmquist over 7 years ago in reply to Abhishek Tripathy

TI__Mastermind 45250 points

Abhisek,
I will request the simulation and send it to you as soon as I receive it.
You are correct about the schematics.
Thanks for your help with this!
Richard Elmquist

0 Richard Elmquist over 7 years ago in reply to Richard Elmquist

TI__Mastermind 45250 points

Abhisek
I am going to have to send the project to your email.
Please let me know what you think once you are able to look at it.
Thanks for your help with this!
Richard Elmquist

0 Abhishek Tripathy over 7 years ago in reply to Richard Elmquist

TI__Intellectual 835 points

Hi Richard,

As per our email communication, I am closing this thread. Please revert in case anything else is required.

Regards,
Abhisek

Power management

Power management forum

TPS62240: Simulation Question