WEBENCH® Tools/BQ34Z100EVM: tested learn cycle for lead acid battery but learn status is in 0x04...

manoj sai

Part Number: BQ34Z100EVM

Tool/software: WEBENCH® Design Tools

hi everyone,

i am testing a battery of type : lead acid ,12v,1.3 Ah

Tested the learn cycle ... but no change in learn status ,but full charge capacity is updated to nearly 1200 Mah but no change in learn status,Maxerror ,update status.

gg_file_1.3Ah.rar

charg_dischg_log.rar

over 7 years ago

0 Bryan Kahler over 7 years ago

TI__Mastermind 25955 points

Hi Manoj,

Thank you for the logs, I will analyze them and have a response to you by Wednesday.

Sincerely,
Bryan Kahler

0 Bryan Kahler over 7 years ago in reply to Bryan Kahler

TI__Mastermind 25955 points

Hi Manoj,

There are currently 10 open threads on this issue, and as a result, the information is extremely fragmented.

In an attempt to help you with your gauge in a more efficacious manner, all support will continue in this thread: https://e2e.ti.com/support/power_management/battery_management/f/180/t/688147

Please post in the above-linked thread so we may drive towards a solution.

Sincerely,
Bryan Kahler

Power management

Power management forum

WEBENCH® Tools/BQ34Z100EVM: tested learn cycle for lead acid battery but learn status is in 0x04...