Other Parts Discussed in Thread: LP87322E-Q1, LP873220-Q1, LP87332D-Q1
we use LP87332A for J6 Entry, we find the LDO1 should be 3,3V, but measurment only 1.8v
and LDO2 should be 3.3V, but measurment only 0v.
LP87322E LDO1 should be 1.8V, but only 0.4V
LDO2 should be 1.8v, but only 0.4v
below as schematic:
it's about user guide table 5 setting?
If any suggestion, Please advise me.