TINA/Spice/LM5155: LM5155 Encrypted Spice Model can't be Imported to TINA for Simulation

Steven Shi

Part Number: LM5155
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Spice model for LM5155 is encrypted, importing the model to TI Tina does not work. How can I import this model to TI Tina and run simulation with it?

over 6 years ago

0 Garrett Roecker over 6 years ago

TI__Mastermind 21720 points

Hello Steven,

Can you let me know where you got the TINA model from? There is not one available on the the web.

Thanks,

Garrett

0 Steven Shi over 6 years ago in reply to Garrett Roecker

Prodigy 20 points

Got it from there

http://www.ti.com/product/LM5155-Q1/toolssoftware

Garrett Roecker said:
Hello Steven,

Can you let me know where you got the TINA model from? There is not one available on the the web.

Thanks,

Garrett

0 EricLee over 6 years ago in reply to Steven Shi

TI__Guru 58311 points

Hi
The responsible engineer is out of office now. He will reply by 4/23.
Regards
EL

0 Garrett Roecker over 6 years ago in reply to Steven Shi

TI__Mastermind 21720 points

Hi Steven,

I have contact the engineer that supports the model. This engineer will help you.

Thanks,

Garrett

0 Vivek Agarwal over 6 years ago

TI__Intellectual 1595 points

Hi Steven,

Encrypted PSpice model cannot be used for simulations in TINA-TI and unencrypted model is required for that.

However, LM5155 TINA-TI model is enabled in WEBENCH, you can download from there and have the simulations.

Thanks,

Vivek Agarwal

Power management

Power management forum

TINA/Spice/LM5155: LM5155 Encrypted Spice Model can't be Imported to TINA for Simulation