Other Parts Discussed in Thread: TPS92630-Q1, LP5521
Hi ,
Could you please help to check what's the part number of TI LED driver solution can be design in the circuit? (see attached)
Thank you!
Sincerely,
Chin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: TPS92630-Q1, LP5521
Hi ,
Could you please help to check what's the part number of TI LED driver solution can be design in the circuit? (see attached)
Thank you!
Sincerely,
Chin
Hi Keneth,
If we use the same LED circuit and use I2C from MCU to control brightness of RGB LED, we just onle need brightness
do you think LP5521 is a suitable solution? We need Linux driver support, and seems LP5521 have ready Linux to use.
http://www.ti.com/lit/ds/symlink/lp5521.pdf
http://www.ti.com/tool/lp5521sw-linux
or you have any other recommend part that can use I2C to control RGB brightness and also Linux driver support?
It seems LP5521 has more powerfull function that we don't need.
Thanks!
Sincerely,
Chin
LP5521 uses I2C to adjust the brightness and supports 25.5mA per channel.
If this is OK for you, LP5521 is a good fit.