• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 411 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Isolate dc-dc requirements

David chen
Expert 1200 points

Other Parts Discussed in Thread: UCC28C41, UCC28C45, UCC38C41, UCC38C45

hi  Team:

I want to designed a Isolate dc-dc  power!

Vin: 10-16V

Vout:+12V/1A,-12V/0/5A;

  product Size: 30*30*12mm can OK? if not,Product size can be increased;

Do you have any recommendations?

  • 0
    TI__Genius 13660 points

    Hi David,

    Flyback topology is recommended for this spec.  But generally it can achieves approximately15w~20w / inch^3 with 90Vac~265Vac input. 

    So it is almost impossible to meet your requirement of power density, especially the input voltage is so small, which will lead a larger size.

    You can use PWM controller UCC28C45, or UCC38C45, or UCC28C41, or UCC38C41.

    Regards,

    Teng