Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 124 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS2544: CDP - SDP2 recognition without discharge

TPS2544: About FAULT#

user4487274
Prodigy 130 points
Part Number: TPS2544

Hello,

Is it correct that FAULT# is not asserted to low even if EN becomes form high to low? 

Thank you.

Katsuhiro

  • 0
    TI__Mastermind 18031 points

    Hi Katsuhiro,

    If fault is pulled up by VIN, Fault will not assert even EN becomes from high to low.

    For TI's policy, I will first click resolved button.

    If you have any other concern, contact me any time.

    If you think resolved, please help click 'Issue is solved button'.

    Thanks.