• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 362 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

UCD9090A: is there method to re-download firmware to UCD9090A when UCD9090A can't be communicated by PMBUS

UCD9090A: Need firmware to escape from ROM_MODE.

Almar van Merwijk
Prodigy 20 points
Part Number: UCD9090A

(I was redirected here from customer support because of limited resources).

While developing our production tool, I put one of our cards into ROM_MODE and the Fusion GUI cannot get it into normal flash mode again.

Updating the DFlash checksum does not work.

I would like to try it by "Download Firmware" but then I need a firmware file.

The current firmware in the sequencer is UCD9090A|2.4.3.0811|160922

If there are other/better options I would like to know them.

Thanks.

Almar