BQ34Z100-G1: we have facing the issue when we upload the fuel gauge

venkatesh kattimani

Part Number: BQ34Z100-G1

Hi ,

We are using the BQ34Z100-G1 to updated the charge/discharge current and soc, remaining capacity and full capacity but when we upload the fuel gauge after that its not showing the FCC,and Remaining

capacity please suggest me way its not updating the remaining capacity as well full capacity.

over 5 years ago

0 Steven Yao over 5 years ago

TI__Genius 12215 points

You need to configure the data flash according to the cell characteristics, as well as pack configuration, please refer to the document via the link of http://www.ti.com/lit/an/slua664/slua664.pdf

You also need to do learning to optimize the battery model, please refer to the document via the link of http://www.ti.com/lit/an/slua903/slua903.pdf

Please also refer to http://www.ti.com/tool/GPCCHEM for how optimize the chemistry data before learning cycle.

Power management

Power management forum

BQ34Z100-G1: we have facing the issue when we upload the fuel gauge