• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 64 subscribers
  • Views 382 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65084: schematic check

Tommy Tzeng
Genius 5115 points
Part Number: TPS65084
Other Parts Discussed in Thread: CSD87381P, CSD87588N, TPS650941EVM-116

Hi Sir,

The customer want to know if the schematic is correct and any modify or suggestion, thanks for your great support.

TPS650842(1).pdf

  • 0
    TI__Genius 17380 points

    Hi Tommy,

    Thank you for posting. I did quick review based on the schematic checklist, which I recommend customer also to use for layout: https://www.ti.com/lit/zip/slva733 

    I would recommend:

    1. Setting C373 to not-populated by default
    2. Setting C387 to not-populated by default
    Didn't find much on the web for EMB02K03HP but generally warn that the efficiency is typically a few percent lower compared to TI FETs. If it is similar to FDMS3660S, then I would estimate about 5% lower efficiency than CSD87588N @ 5A, 2% lower efficiency @ 11A. The smaller CSD87381P  would also be expected to have higher efficiency until about 8A. 
    1. I did not check ILIM calculations for non-TI FETs
    • Recommend not-populated for the snubber circuits by default

    Overall the schematic closely resembles the Intel reference design which is good. If a layout review is desired, I will require that the layout checklist be filled out and completed with any questions included.

  • 0 in reply to Kevin LaRosa
    Genius 5115 points

    Hi Kevin,

    thanks for your great help and reply, if there are any problem, we will learn from you again,thanks.

  • 0 in reply to Kevin LaRosa
    Genius 5115 points

    Hi Kevin,

    may we know and learn from you,

    Can the TPS650842 be place on TPS650941EVM-116 board to verify whether the output is normal, and no need command require under the default value?

  • 0 in reply to Tommy Tzeng
    TI__Genius 17380 points

    Hello,

    A TPS650842 should work on a TPS650941EVM-116 with the following changes:

    Uninstall R36 & Install R37 (BUCKX_1P8V is different for TPS650941 vs. TPS650842)

    Uninstall R49 (SWB1 and SWB2 are separate in TPS650842)

    Uninstall R67, Install R68 (GPO4 pull-up, probably doesn't matter)

    There are a few other changes but I don't expect they would affect functionality:

    R26, R35 - ILIM1 & ILIM2 will be wrong, but higher so that should be fine.

    BUCK2 output capacitance is higher than needed but that should be fine.

    BUCK2 inductor is a 220 nH instead of 330 nH but that should not have a major impact.