• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 275 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPSM265R1: Soldering issue

TPSM265R1: Hand solder

Steve Green
Intellectual 430 points
Part Number: TPSM265R1

Can this part be hand soldered for prototype builds?

  • 0
    TI__Expert 8130 points

    Hello Steve,

    Take a look at the similar post linked below in which I believe might help with your question:

    It is doable to hand solder these by hand but it's not something we recommend. It all depends on how well the soldering job is.

    Regards,
    Alejandro