This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TI support,
I'm a little confused about the result of LStatus and UpdateStatus.
I've seen similar posts in the past, though.
I finally reached the LStatus 0x06. So, I was expected to get LStatus 0x0e after one more learning cycle.
But, LStatus has not become 0x0e but 14(decimal? this must be 0x04 in hex.) on screen of bqStudio.
On the other hands, UpdateStatus has read as 0x0e on GasGauging:State of DataMemory.
Would you let me know both Qmax and Ra table has been updated successfully?
Regards,
Kunny
Hi Kunny,
0x0e is 14 in decimal so Omax and Ra table should be successfully updated.