DS38EP100, DS80EP100 - How to distinguish the two devices from IC marking.

Kawai

Guru 19785 points

Other Parts Discussed in Thread: DS80EP100, DS38EP100

Hi Team,

We have total two DS38EP100 or DS80EP100 EVM. However, I cannot distinguish which device is on the EVM. Could you give us the information how to distinguish them ?

Thanks in advance.

Best Regards,

Kawai

over 11 years ago

0 Michael Lu (Santa Clara) over 11 years ago

TI__Mastermind 29655 points

Hi Kawai-san,

The difference is in the IC marking of the U1 part. I will check with our Product Engineer to see what the difference is in the markings.

Thanks,

Michael

0 Michael Lu (Santa Clara) over 11 years ago in reply to Michael Lu (Santa Clara)

TI__Mastermind 29655 points

Hi Kawai-san,

I just received feedback from our Product Engineer:

The marking of on the IC is done in the following format for the DS38EP100:

YM = YEAR MONTH DATE CODE
L = LAST DIGIT IN ASSY LOT CODE

The marking of on the IC is done in the following format for the DS80EP100:

YM = YEAR MONTH DATE CODE
L = LAST DIGIT IN ASSY LOT CODE

Thanks,

Michael

0 Kawai over 11 years ago in reply to Michael Lu (Santa Clara)

Guru 19785 points

Hello Michael-san,

Thanks for the information !!

I guess I have the older part as the board I have is built in 2006. It may not be the production sample as they do not have the part number such as 38 or 80 on their marking.

I will ask for latest EVM from our sales.

Best Regards,
Kawai

Interface

Interface forum

DS38EP100, DS80EP100 - How to distinguish the two devices from IC marking.