Frequent Questions

  • [FAQ]: Requesting Access to Safety Documentation for Industrial Safety BLDC Devices

    Part Number: DRV8162 Other Parts Discussed in Thread: DRV8161 , DRV8353F For BLDC motor drivers designed to support industrial functional safety applications, most of the extended documentation requires an NDA to be in place with TI in order to request…

  • [FAQ] F29H85X-SOM-EVM: How to flash two images into the same bank without them overwriting each other

    Part Number: F29H85X-SOM-EVM Hi expert, I want to flash two images into same banks. Suppose my bootloader is taking flash space from 0x1000_0000 to 0x1000_CFFF. The application is taking space from 0x1000_D000. When flashing app, boot is getting erased…

  • [FAQ] CC2340R5: Speed up the Startup Time for Low-Frequency Clock

    Part Number: CC2340R5 1. Background I measured, on real hardware, the time from POR until the firmware enters Standby mode, and identified where the time actually goes. The short answer: the dominant cost is low-frequency clock (LFCLK) qualification…

  • [FAQ] TDA4AEN-Q1: How to fix errors in loading Eth and CddIpc Tresos plugins of TDA4AEN SDK 11.2.x

    Part Number: TDA4AEN-Q1 Facing issue in loading the TDA4AEN/J722s 11.2.x plugins of Eth & CDDIPC.

  • [FAQ] AM62P: What is WPE?

    Part Number: AM62P Overview of what WPE is, configurations, and performance results.

  • [FAQ] TPS7H6003-SP: What is the maximum duty cycle of my driver?

    Part Number: TPS7H6003-SP What is the maximum duty cycle of the TPS7H6003-SP? Can it support 100% duty cycle?

  • [FAQ] TPS7H5020-SEP: Space Grade Boost Converter

    Part Number: TPS7H5020-SEP Other Parts Discussed in Thread: TPS7H5030EVM , TPS7H5020EVM What is TI's recommendation for a space grade boost converter?

  • [FAQ] F29H859TU-Q1: How to Flash SSU Example in Bank Modes other than Bank Mode 0 and what is the significance of FOTA enable checkbox

    Part Number: F29H859TU-Q1 Hi expert, Can you please explain how to flash SSU examples in other bank modes. What is the FOTA enable checkbox and how is it requried here?

  • [FAQ] AM2634-Q1: How to debug applications without GEL Script and using SBL NULL

    Part Number: AM2634-Q1 Other Parts Discussed in Thread: UNIFLASH Hi expert, Can you explain the procedure to debug applications using SBL NULL

  • [FAQ] TDA4AEN-Q1: Steps to Configure a Standalone C75x Application with SysConfig on J722S EVM

    Part Number: TDA4AEN-Q1 Other Parts Discussed in Thread: SYSCONFIG , AM67 , UNIFLASH , TDA4VEN-Q1 , MATHLIB , FFTLIB Hi Team, What are the steps required to set up SysConfig and configure a standalone C75x application on a J722S EVM? Regards, Shabary…

View FAQ threads