• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: multicam with 4 camera can not work

guokai yuan
Prodigy 140 points
Part Number: TDA4VM

Hi,

I am using J721E with the sdk 7.1.

Recently,i met a problem that when i chose 3 cameras ,the multicam usecase could run well.But when i chose 4 cameras,the multicam usecase did not work.

The type of camera is AR0233-UB953_MARS.

How can i solve the problem?

  • 0
    TI__Guru**** 475565 points

    Hi,

    When you say, it did not work, can you provide some more information? Is capture working fine for all 4 camera? Do you issue in mosaic? 

    I think, AR0233 also outputs 1080p resolution, same as imx390, which is tested in SDK. So from resolution point of view, it should not be problem supporting it in multi-cam application. 

    Regards,

    Brijesh