TDA4VM: DDR_RET pin is missing in sysconfig file

ratheesh chandran

Part Number: TDA4VM
Other Parts Discussed in Thread: SYSCONFIG,

Hello TI Team

For the pin configuration of the TDA4VM using the sysconfig tool, we are not able to locate the "DDR_RET" pin from the pin list.

regards

Ratheesh

over 4 years ago

0 Kevin S over 4 years ago

TI__Mastermind 38370 points

Hi,

I'll pass this question / observation along to the sysconfig tool experts, but since the DDR pins are not multiplexed with other signals and we have a separate tool for configuring the DDR registers, is there a specific reason why you are looking for this signal to be included in the sysconfig tool?

0 ratheesh chandran over 4 years ago in reply to Kevin S

Intellectual 805 points

Hi,

I could see other DDR related signals under DDRSS, except for DDR_RET.

I am not aware that you have another tool for configuring DDR registers, can you share the link of that tool.

regards

Ratheesh

0 Karthik Ramanan over 4 years ago in reply to ratheesh chandran

TI__Guru** 113810 points

Ratheesh,

Is this problem still open?

Regards

Karthik

0 ratheesh chandran over 4 years ago in reply to Karthik Ramanan

Intellectual 805 points

Hello Karthik.

The problem is still open.

regards

Ratheesh

0 Kevin S over 4 years ago in reply to ratheesh chandran

TI__Mastermind 38370 points

Hi Ratheesh,

You can access the DDR register configuration tool here: https://www.ti.com/lit/an/spracu8/spracu8.pdf

Best regards,
Kevin

0 Kevin S over 4 years ago in reply to ratheesh chandran

TI__Mastermind 38370 points

Hi Ratheesh,

You can access the DDR register configuration tool here: https://www.ti.com/lit/an/spracu8/spracu8.pdf

Best regards,
Kevin

Processors

Processors forum

TDA4VM: DDR_RET pin is missing in sysconfig file